Test
Silver flakes in an inorganic silicate aqueous solution, specially formulated adhesive for demanding bonding applications.
These carbon tapes are conductive and may be used conveniently for scanning electron microscopy or EDS applications. This is the same material as the PELCO Tabs™, Carbon Conductive Tabs, but in tape form. The tape form allows for special application uses such as custom sizes, cut-outs and shapes. The purity of this tape is identical to the PELCO Tabs™; only very small impurities of Al and Si may be found. Both sides of the tape have a thick conductive adhesive (conductive inner film is 35µm and the adhesive is 45µm on each side for a total of 125µm [5 mils]) with a white liner. The double adhesive and conductive design permits quick mounting of samples without using liquid or colloidal adhesives.
Both sides of the tape have a thick conductive adhesive (conductive inner film is 35µm and the adhesive is 45µm on each side for a total of 125µm [5 mils]) with a white liner. The double adhesive and conductive design permits quick mounting of samples without using liquid or colloidal adhesives. The tape is relatively solid and non-porous and does not absorb small samples. The variety of widths affords efficient application to various specimen mount surface sizes. Thickness is 0.16mm. Available in six widths. Can be used down to -20°C (-4°F) and temperature maximum is 60°C (140°F). Available in 5, 8, 12, 20, 25, and 50mm W x 20m L (0.19, 0.31, 0.47, 0.79, 0.98, and 1.96" x 21.8 yd). Core diameter is 76mm (3"). SEM mounts not included.
Copper Conductive Tape, Double Sided Adhesive, 12.7mm W x 16.4m L
SEM conductive tape, electrically conductive with a clean, smooth background. Nickel is embedded in the adhesive.
Electrically and thermally conductive adhesive, Nickel filled, One part system, Low viscosity, For applications up to 1000 deg F.
Can be used to mount particles 15-20 microns. Isolate unwoved cloth. Adhesive power/25mm: 1000 gf.
Conductive resistivity: 50ohm/sq.Inch
Thickness: 0.16 mm
Pad: 0.07 mm
Adhesive: 0.045 mm x 2
50-224-1507 1GAL SOLVENT CAN XYLOL THINNER
Premixed, prebuffered fixatives, are pH adjusted for immediate laboratory use. They are freshly prepared upon receipt of order to ensure maximum shelf life. The fixatives are filled in 20 ml glass vials (10 ml/vial). This allows for the immediate fixation of your specimens without costly and time consuming transfer associated with ampoule contained fixatives. In Sorensons Buffer.
pH: 7.2
NC1866508 PAINT WITH APPLICATOR
NC1687950 CARBON DISK CONDUCTIVE 12MM
NC2735610 COOLGUARD 56 SERIES 20M
NC2607502 CARBON-SUPPORT-FILM-FOR-TEM
NC2957351 10 UL CO-RE II CONDUCTIVE FILT
NC2087051 PELCO SEMCLIP PK/10