Test
The contents of this kit are described as follows: 1.0 mm ID Carbon Fiber Supported Sample Probe Aqueous 6-port valve Valve Pump Tubing Kit Nut and Ferrule Placement Fitting (10) CTFE ferrules, 1/16 Internal Standard Tee Kit Passive Bubbler Tee PEEK Tubing, Tee, Fittings and Ferrules
Nickel Skimmer Cone for iCAP Q
Quartz cyclonic spray chamber, for use with iCAP Q ICP-MS System, low-volume, baffled cyclonic spray chambers efficiently filter out larger aerosol droplets for improved plasma stability.
3.5 mm Skimmer Cone insert for iCAP Q/Qnova ICP-MS Systems – Robust Matrix Tolerance Applications
The PTFE Mira Mist™ nebulizer produces excellent mist and can handle high level of particulates in sample. This Mira Mist nebulizer is for samples with high HF, Sulfuric acid, and some other solvents that would attack PEEK nebulizers.
The PC3 is a compact Peltier cooled inlet system which incorporates the ESI cyclonic spray chamber. The peltier within the PC3 is air cooled, as such the system can be connected to any ICP. The PC3 cools the outer walls of the cyclonic spray chamber reducing the water or solvent vapor loading on the plasma resulting in enhanced stability and performance. Features and Benefits: Thermal stabilization of spray chamber improves long-term stability Default settings of spray chamber temperature (+2°C/ -5°C) for aqueous or organic solvents. Custom temperature settings are available upon request Interchangeable quartz, PFA and borosilicate cyclonic spray chambers available Fast rinse-out using PFA-ST nebulizer and O-Ring free quartz cyclonic spray chamber Reduced oxides Kit includes: PC3-LT Low temperature Chiller Power Supply Kit Sample Transfer Line Quartz Connector for ZipTorch PFA Connector for Injector ST Sampling Tube 0.15 mm I.D. ST Sampling Tube 0.25 mm I.D. ST Sampling Tube 0.5 mm I
SPS 4 probe 0.8 mm id with green markers. Inert, FEP sleeved for SPS 4 autosampler.
Duo Torch (EMT); ICP quartz torch for use with iCAP 6000 Series Duo instruments using; the EMT Torch holder.
PVC peristaltic pump tubing - ID 0.508 mm - orange/yellow (3 bridges, flared end). 12 tubings.
Ni Sample cone. 1.1mm diameter orifice for minimal deposition when; analyzing high matrix samples. Solid Ni construction.
Suit your sample matrices and applications with this comprehensive range of Thermo Scientific™ Peristaltic Pump Tubing for the Thermo Scientific™ iCAP™ Q ICP-MS; all designed for durability and fitness for purpose.
Gain improved plasma stability from the tulip design and easy, push-in insertion with this fully demountable, single piece, Thermo Scientific™ Quartz Torch with connection-free gas supply for our Thermo Scientific™ iCAP™ Q ICP-MS system.All connectivity (argon gas supplies and plasma ignition) is contained within the torch holder to reduce complexity and improve usability.
3.5 mm Skimmer Cone insert for iCAP Q/Qnova ICP-MS Systems – High Matrix Tolerance Applications
PVC Standard Pump Hose ID 0.762 Black/Black
The PC3 is a small, robust Peltier cooled cyclonic spray chamber. The PC3 offers the advantages of low memory effects, constant temperature, fast rinse-out, and high sample transport efficiency. The cooled outer walls of the PC3 spray chamber enhance long-term signal stability, reduce polyatomic interferences such as oxides, and reduce solvent loading when volatile organic solvents are analyzed. The PC3 has two preset temperatures +2 °C / -5 °C and is ideal for analysis of aqueous or aqueous/organic mixtures. The PC3-LT operates at +2 °C / -20 °C to reduce the solvent load on the plasma for analysis of 100% volatile organic solvents. The sample introduction kit includes: PC-LT Peltier Cooler and Power Supply Baffled Quartz Cyclonic Spray Chamber (N8145402) PFA-ST MicroFlow Nebulizer (N8122192) 0.15 mm I.D. ST Sampling Tubing, 1 m (N8122382) 0.25 mm I.D. ST Sampling Tubing, 1 m (N8122383) 0.5 mm I.D. ST Sampling Tubing, 1 m (N8122384) Tee Connector for Mixing Oxygen and Make-Up Gas, 5