Air-Purifying Respirator Cartridges and Filters
Air-Purifying Respirator Cartridges and Filters
Air-purifying respirator cartridges and filters are installed in reusable half-mask or full-facepiece respirators to provide protection from airborne contaminants. Products are designed to protect against a variety of individual contaminants or combinations of contaminants, including dusts, particles, mists, aerosols, fumes, gases, and/or vapors.
Some products protect against both particulate and gaseous contaminants, however, there is no single filter and cartridge combination that protects against all substances.
Correct product selection depends on the environment(s) in which the product will be used and the type(s) of hazard(s) or risk(s) expected in the selected environment(s). NIOSH-rated cartridges and canisters use a color-coding system for secondary identification.
Product service life depends on many factors, including environmental conditions, breathing rate, cartridge filtering capacity, and the quantity of contaminants in the air. Regulatory compliance details for each filter and filter/cartridge package can be obtained at the individual product level and should be carefully scrutinized during selection.
- (4)
- (3)
- (7)
- (12)
- (1)
- (1)
- (3)
- (2)
- (1)
- (49)
- (26)
- (1)
- (12)
- (1)
- (1)
- (1)
- (1)
- (9)
- (1)
- (1)
- (2)
- (1)
- (1)
- (2)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (2)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (3)
- (1)
- (1)
- (11)
- (1)
- (1)
- (2)
- (2)
- (1)
- (1)
- (1)
- (1)
- (41)
- (1)
- (1)
- (2)
- (1)
- (2)
- (2)
- (1)
- (32)
- (1)
- (7)
- (1)
- (1)
- (2)
- (1)
- (1)
- (3)
- (2)
- (1)
- (4)
- (23)
- (1)
- (1)
- (1)
- (4)
- (8)
- (8)
- (13)
- (1)
- (2)
- (6)
- (1)
- (17)
- (1)
- (6)
- (1)
- (1)
- (1)
- (2)
- (1)
- (1)
- (2)
- (2)
- (2)
- (2)
- (2)
- (1)
- (1)
- (1)
- (2)
- (10)
- (9)
- (3)
- (1)
- (18)
- (32)
- (5)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (2)
- (6)
- (42)
- (3)
- (4)
- (1)
- (1)
Filtered Search Results
GVS FILTER TECHNOLOGY INC ELISPE P100 MASK W/FILTERS M/L
This item has a minimum qty of 31 per supplier requirements.
Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
MSA™ Phalanx™ CBA-RCA Gas Mask Canister
Phalanx canisters for use with CBA-RCA (Chemical Biological Agent- Riot Control Agent) gas masks.
Dentec Safety™ Organic Vapor Particulate Cartridge
Supplier Diversity Partner
Small and/or diverse supplier based on Federal laws and SBA requirements.
Learn More
Small and/or diverse supplier based on Federal laws and SBA requirements.
Learn More
Dentec Safety™ Organic Vapor Particulate Cartridge features unique space plenums that allow users to access the entire filter material reducing breathing resistance, providing longer cartrdige life, reducing costs and improving productivity.
Includes | Cartridges and filters |
---|---|
For Use With (Equipment) | Masks |
Product Type | Respirator Accessories |
Material | Plastic |
Moldex™ 8000 Series Half-Mask Respirators Cartridges
Supplier Diversity Partner
Small and/or diverse supplier based on Federal laws and SBA requirements.
Learn More
Small and/or diverse supplier based on Federal laws and SBA requirements.
Learn More
For use with 8000 series half mask respirators
MSA™ Advantage™ 1000 Riot Control Canisters, Pack of 6
Bayonet-type CBA/RCA canisters for use with Advantage 1000 and 3200 gas mask respirators.
3M™ 5000 Series Respirator Accessory, Filter Retainer 501
Used to hold 3M™ Particulate Filters 5N11 and 5P71/07194(AAD) in place on top of 3M™ Respirators 5000 Series and 3M™ Cartridges 6000 Series and 3M™ Filter Adapter 603.
Dentec Safety™ Comfort-Air™NxMD Filter Cover and Holder with N95 Filters
Supplier Diversity Partner
Small and/or diverse supplier based on Federal laws and SBA requirements.
Learn More
Small and/or diverse supplier based on Federal laws and SBA requirements.
Learn More
Dentec Comfort-Air™NxMD filter cover and holder with N95 Filters. Suitable for COVID virus in accordance with CDC guidelines and non-oil based aerosols. Can be mounted directly on all Comfort-Air™ series half and full face masks.
Dentec Safety™ Comfort-Air™Nx Filter Cover and Holder with N95 Filters
Supplier Diversity Partner
Small and/or diverse supplier based on Federal laws and SBA requirements.
Learn More
Small and/or diverse supplier based on Federal laws and SBA requirements.
Learn More
Dentec Comfort-Air™Nx filter cover and holder with N95 Filters. Suitable for COVID virus in accordance with CDC guidelines and non-oil based aerosols. Can be mounted directly on all Comfort-Air™ series half and full face masks.
Dentec Safety™ Comfort-Air™Nx Filter Pad assembly For N95 Filter Pads
Supplier Diversity Partner
Small and/or diverse supplier based on Federal laws and SBA requirements.
Learn More
Small and/or diverse supplier based on Federal laws and SBA requirements.
Learn More
Dentec Comfort-Air™Nx filter pad assembly for N95 filter pads. Suitable For COVID virus in accordance with CDC guidelines and non-oil based aerosols.
Dentec Safety™ Comfort-Air™NxMD Filter Cover For N95 Filter Pads
Supplier Diversity Partner
Small and/or diverse supplier based on Federal laws and SBA requirements.
Learn More
Small and/or diverse supplier based on Federal laws and SBA requirements.
Learn More
Dentec Comfort-Air™NxMD filter cover for N95 filter pads. Suitable for COVID virus in accordance with CDC guidelines and non-oil based aerosols. Can be mounted directly on all Comfort-Air™ series half and full face masks.
Disposable | Reusable |
---|
MSA™ CBRN Canister for Millennium and Ultra Elite Facepieces
Canisters are compatible with MSA Millennium gas masks and MSA Ultra Elite CBRN gas masks.
Honeywell™ Sperian™ S-Series Cartridges and Filters
S-Series filters work with both full and half mask respirators that only accept threaded cartridge connections
Dentec Safety™ Comfort-Air™NxMD Filter Holder For N95 Filter Pads
Supplier Diversity Partner
Small and/or diverse supplier based on Federal laws and SBA requirements.
Learn More
Small and/or diverse supplier based on Federal laws and SBA requirements.
Learn More
Dentec Comfort-Air™NxMD NxMD filter holder for N95 filter pads. Suitable for COVID virus in accordance with CDC guidelines and non-oil based aerosols. Can be mounted directly on all Comfort-Air™ series half and full face masks.
Disposable | Reusable |
---|---|
With Exhalation Valve | No |