Test
Thermo Scientific™ PETG Single-Use Bottle Assembly System includes a Nalgene Square PETG Bottle, a 53 B ported closure with one vent filter line, and two 1/4-in plugged connection lines
Thermo Scientific™ PETG Single-Use Bottle Assembly System includes a Nalgene Square PETG Bottle, a 38 to 430 mm ported closure with one vent filter line and one 1/8-in plugged connection line.
Thermo Scientific™ Polycarbonate (PC) Single-Use Bottle Assembly System includes a Nalgene Square Polycarbonate Bottle, a 38 to 430 mm ported closure with one vent filter line, and one 1/8-in plugged connection line
Content And Storage | Store at room temperature. |
---|---|
Through the Closure Dispensing | Yes |
Product Type Specs | Standard Single-Use Bottle Assembly System |
Material | Polycarbonate |
Closure Type | Screw Cap |
Sterility | Sterile |
Closure Material | HDPE |
Thermo Scientific™ Polycarbonate Single-Use Bottle Assembly System includes a Nalgene Square Polycarbonate Bottle, a 53 B ported closure with one vent filter line and two 1/4-in plugged connection lines.
Content And Storage | Store at room temperature. |
---|---|
Through the Closure Dispensing | Yes |
Product Type Specs | Standard Single-Use Bottle Assembly System |
Material | PETG |
Closure Type | Screw Cap |
Sterility | Sterile |
Closure Material | HDPE |
A single-use, stirred tank bioreactor designed for the non-GMP cultivation of mammalian cell lines. Its rigid design includes a semi-hemispherical shaped polycarbonate vessel, a multi-port high-density polyethylene (HDPE) headplate, a scoping marine impeller, both open pipe and sintered spargers, weldable C-Flex tubing, and all necessary gas inlet and outlet filters.
ChemRxnHub™ process systems are complete with benchtop stand, overhead stirrer and glassware. Available with the optional manifold connection and heat transfer fluid draining system. The unique design of the ChemRxnHub™ support stand and clamping system allows for quick and easy installation/removal of glassware and fits into most benchtop hoods.
Manufactured from type 1 class a Borosilicate glass. Bottom indent and 3 vertical baffles for optimal mixing. Sidearm cap: 45mm Center cap: 100mm Dimensions: 245" x 135" Flask size: 1l
3L Unjacketed Bio Reactor Vessel. Vessels are constructed of heavy wall tubing and are graduated in 200mL subdivisions with numbers every 1000mL. Like-for-like replacement parts for Applikon Biotechnology and Broadley-James brands of bioreactors. Applikon is a registered trademark of Applikon Biotechnology, Inc. Broadley-James and Broadley-James Corporation are registered trademarks of Broadley-James Corporation.
600mL jacketed pressure reactor, complete with #11 Ace-Thred inlet/outlets, 60mm Ace-Thred 4 neck head, 50mm bottom valved adapter, 100 micron PE & 350 micron PP filter supports, stir shaft, bearing, condenser, addition funnel, clamp & O-rings
NC1613346 ABLE 30ML DISPOSABLE BIOREACTO
1L jacketed filter reactor body with 100mm ID grooved top flange, #80 bottom thread, 100mm IDx180mm depth, with CAPFE O-ring, #11 Ace-Thred inlet/outlet connections, use with 3/8in ID tubing, pressure rated at 35 psi.
Reaction vessels, unjacketed, Capacity Liters: 50, Flange I.D. (mm): 300, Valve Style: 2" BP Detachable, Overall Height mm (in.): 810 (31.9), Height to Width Ratio: 2.5:1. Unjacketed large scale process reaction vessels. The 10, 15, and 20L vessels have a 200mm ID flange with an o-ring groove formed in the surface of the flange. The 30L and 50L have a 300mm ID flat ground flange. The 10, 15, and 20L are available with a choice of a 2” beaded pipe drain that is detachable, or the 0-20mm valve with 3/4” sidearm that is permanently sealed. These flush bottom (zero dead space) valves are designed to prevent solids from collecting in the bottom of the vessel. Vessels equipped with the 0-20mm sealed on valve are supplied complete with a TFE plug having Perfluoro chemically resistant o-rings. Vessels are serial numbered and have a graduation scale on both sides showing the approximate volume.PLEASE NOTE: VALVE, BEADED PIPE COUPLINGS, AND ADAPTERS MUST BE PURCHASED SEPARATELY.
600mL jacketed filter reactor body with 60mm ID grooved top flange, #50 bottom thread, 83mm IDx185mm depth, with CAPFE O-ring, #11 Ace-Thred inlet/outlet connections, use with 3/8in ID tubing, pressure rated at 35 psi.
3L Instatherm coated filter reactor body with a 150mm I.D. grooved top flange for connection to a reaction head with the use of a quick release clamp, and a #80 Ace-Thred bottom thread for use with a bottom adapter with a filter support and drain valve. Instatherm provides safer, rapid heating, and can be operated at 115v with ACE Proportional Temperature Controllers, or with a Powerstat. Reactor body supplied with a CAPFE o-ring and a power cord. Dimensions: 150mm I.D. x 185mm D.
3L HW FILTER REAC C