Filtered Search Results

Labconco™ SpillStopper™ Work Surface for 6 Ft. Protector™Premier™and Protector™XL Hoods
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More


Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Labconco SpillStopper™ Work Surface is dished and contoured to conform to the interior liner to contain spills.

Product Type | Work Surface |
---|---|
For Use With (Equipment) | Protector XL Laboratory Hood |
Material | Epoxy Resin |
For Use With (Application) | Laboratory Fume Hood Work |
Labconco™ Protector™ XL™ Fume Hoods
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More


Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Protector™ XL™ Fume Hoods with By-Pass Block are low-velocity and high performance. Feature chemical-resistant fiberglass, composite panel liners, Eco-Foil™ air foil and aerodynamic Clean-Sweep™ airflow openings.

Receptacle Type | GFCI |
---|---|
Height (Metric) | 149.9 cm |
Depth (English) | 37.7 in. |
Color | Glacier White |
Material | Powder-coated Steel |
Product Type | Benchtop Fume Hood |
Depth (Metric) | 80.5 cm |
Voltage | 100/115 V |
Height (Metric) Sash Opening | 71.1 cm |
Amperage | 10 A |
Certifications/Compliance | SEFA 1; CFR 29, Part 1910; ASTM E84-09C; NFPA 45; ANSI Z9.5; ASHRAE 110; CAN/CSA C22.2 No. 61010.1; UL 61010-1; SEFA 8, Cabinet Surface Finish Tests; UL 1805 |
Lighting Type | LED |
Coating | Powder |
Liner Material | Chemical-resistant, Fiberglass-reinforced Composite |
Hertz | 50/60 Hz |
Labconco™ LabSolutions™ Powder Detergent
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More


Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Removes grease, blood, agar, protein digestates, and other contaminants

Form | Powder |
---|---|
Product Type | Detergent |
Color-coded | Yes |
pH | 12.5 |
Scent | Unscented |
For Use With (Application) | For use in Glassware washers, removes range of contaminants including Protein digestates, Agar, Blood and Grease |
Sterility | Non-sterile |
Labconco™ Work Surface Accessory, Oval Polypropylene Cupsink
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More

Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Easily remove waste from your laboratory worktable with the Labconco Oval Cupsink.

Labconco™ LabSolutions™ Low-Foaming Liquid Detergent
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More

Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Removes a wide range of contaminants

Labconco™ LabSolutions™ Neutralizing Acid Rinse
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More


Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Mild acid corrects pH, reducing alkaline detergent residue

Labconco™ Protector™ Filtered Fume Hood Accessory, ADA Remote Control
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More

Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
For use with Protector Echo and Airo Filtered Fume Hood
Labconco™ CApture™ BT Fuming System Accessory, Perforated Shelf Kits
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More


Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
For use with CApture BT Fuming System
Depth (English) | 23 in. |
---|---|
Width (English) | 26 in. |
For Use With (Equipment) | CApture BT Fuming System |
Product Type | Fuming System Chamber |
Depth (Metric) | 58.4 cm |
Material | Stainless Steel |
Width (Metric) | 66 cm |
Labconco™ Protector™ Demonstration Hood
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More

Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Low-profile, light-duty fume hoods provide close observation of procedures. Labconco™ Protector™ Demonstration Hood designed to provide 360° of close observation of procedures during educational demonstrations.
Includes | No service fixtures or duplex |
---|---|
Depth (English) | 29.1 in. |
Width (English) | 33.6 in. |
Product Type | Fume Hood |
Depth (Metric) | 73.9 cm |
Color | Glacier White, Gray |
Material | Glass |
Certifications/Compliance | ANSI Z9.5, Modified ASHRAE 110, SEFA 1 |
Coating | Powder |
Width (Metric) | 85.3 cm |
Labconco™ VACUUBRAND™ Diaphragm Vacuum Pump
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More


Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Labconco™ VACUUBRAND™ Diaphragm Vacuum Pump is sized for use with CentriVap Centrifugal Concentrators, RapidVap Vacuum Evaporation Systems and Vacuum Desiccators and have uses with many other pieces of laboratory equipment that require a vacuum source.
Voltage | 115 V |
---|---|
Maximum Pressure | 1 atm |
Pump Type | Vacuum Pump |
Labconco™ Fast-Freeze Flask Bottom Only, Amber
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More


Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Used in the freeze drying process and compatible with all major brands of freeze-drying equipment. Labconco™ Fast-Freeze Flask Bottom Only, Amber is made of high-strength borosilicate glass to withstand extreme temperatures and high vacuum.
Disposable | Reusable |
---|---|
Mouth Style | Wide |
Product Type | Amber Flask |
Bottom Shape | Flat |
Material | Borosilicate Glass |
Labconco™ Fast-Freeze™ Flasks, Complete Assembly
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More


Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Used in the freeze drying process. Labconco™ Fast-Freeze™ Flasks, Complete Assembly is easy to handle and fast to load samples during the experiments.
Disposable | Reusable |
---|---|
Description | Color: Amber |
Mouth Style | Wide |
Product Type | Flask Kit |
Diameter (English) Outer | 4.4 in. |
Color | Amber |
Bottom Shape | Flat |
Material | Borosilicate Glass |
Diameter (Metric) Flask Top Adapter | 1.9 cm |
Weight (Metric) | 1 kg |
Labconco™ SpillStopper™ Work Surfaces for 4ft. Protector™XStream
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More


Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
SpillStopper work surfaces are dished to contain spills
Product Type | Work Surface |
---|---|
For Use With (Equipment) | Protector XStream Fume Hood (48 in.) |
Material | Epoxy Resin |
For Use With (Application) | Laboratory Fume Hood Work |
Labconco™ SpillStopper™ Work Surface for 6ft. Protector™XStream
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More


Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Labconco SpillStopper™ Work Surface is dished and contoured to conform to the interior liner to contain spills.
Product Type | Work Surface |
---|---|
For Use With (Equipment) | Protector XStream Fume Hood (72 in.) |
Material | Epoxy Resin |
For Use With (Application) | Laboratory Fume Hood Work |
Labconco™ SpillStopper™ Work Surfaces for 8ft. Protector™XStream
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More


Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
SpillStopper work surfaces are dished to contain spills
Height (Metric) | 3.2 cm |
---|---|
Depth (English) | 36 in. |
Width (English) | 96 in. |
Product Type | SpillStopper Work Surface (8 ft.) |
For Use With (Equipment) | Protector XStream Fume Hood (96 in.) |
Depth (Metric) | 91.4 cm |
Weight (English) | 250 lb. |
Height Overall (English) | 1.25 in. |
For Use With (Application) | Laboratory Fume Hood Work |
Width (Metric) | 243.8 cm |
Height Overall (Metric) | 3.2 cm |
Weight (Metric) | 113 Kg |
Height (English) | 1.25 in. |