Filtered Search Results

Labconco™ Work Surface Accessory, Oval Polypropylene Cupsink
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More

Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Easily remove waste from your laboratory worktable with the Labconco Oval Cupsink.

Labconco™ LabSolutions™ Low-Foaming Liquid Detergent
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More

Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Removes a wide range of contaminants

Labconco™ SpillStopper™ Work Surfaces Cupsink Cover
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More

Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
SpillStopper™ Cupsink Cover provides a continuous work surface when a cupsink is not in use

Labconco™ FlaskScrubber™ Glassware Washers
Greener Choice
Offers one or more environmental benefits itemized in the U.S. FTC Green Guides.
Learn More
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More


Offers one or more environmental benefits itemized in the U.S. FTC Green Guides.
Learn More

Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Versatile and efficient glassware washers designed for efficient and consistent washing of narrow-neck glassware and general labware.

Inlet Water Temperature (English) Recommended | 120°F |
---|---|
Volume (English) | 6.73 ft.3 chamber volume |
Description | FlaskScrubber Glassware Washer |
Water Consumption | As low as 12.9 L |
Min. Purified Water Pressure | N/A, can be supplied from pressurized and non-pressurized sources |
Volume (Metric) | 190.6 L chamber volume |
Inlet Water Temperature (Metric) Recommended | 49°C |
Material | Stainless Steel (304) |
Inlet Water Temperature (Metric) Max. | 71°C |
Inlet Water Temperature (English) Max. | 160°F |
For Use With (Application) | Ideal for College and University, Government, Pharmaceutical and Industrial Labs or Any Facility Utilizing Reusable Glassware |
Max. Pressure | 120 psi (inlet) |
Includes | Lower spindle rack |
Flow Rate | Hot water inlet 1.25 GPM (4.7 LPM), Cold water inlet of 3.5 GPM (13.2 LPM) |
Product Type | Laboratory Glassware Washer |
Wash Cycles | 9 programs with 1 to 9 total cycles |
Inlet Water Temperature (English) Min. | 120°F |
Certifications/Compliance | UL61010, CAN/CSA C22.2, CE |
Inlet Water Temperature (Metric) Min. | 49°C |
Display | Full-color Touch Screen |
Labconco™ SteamScrubber™ Glassware Washers
Greener Choice
Offers one or more environmental benefits itemized in the U.S. FTC Green Guides.
Learn More
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More


Offers one or more environmental benefits itemized in the U.S. FTC Green Guides.
Learn More

Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Versatile and efficient glassware washers that can handle a wide range of wide-mouth beakers and general purpose labware.

Inlet Water Temperature (English) Recommended | 120°F |
---|---|
Volume (English) | 6.73 ft.3 chamber volume |
Description | SteamScrubber Glassware Washer |
Water Consumption | As low as 12.9 L |
Min. Purified Water Pressure | N/A, can be supplied from pressurized and non-pressurized sources |
Volume (Metric) | 190.6 L chamber volume |
Inlet Water Temperature (Metric) Recommended | 49°C |
Material | Stainless Steel (304) |
Inlet Water Temperature (Metric) Max. | 71°C |
Inlet Water Temperature (English) Max. | 160°F |
For Use With (Application) | Ideal for College and University, Government, Pharmaceutical and Industrial Labs or Any Facility Utilizing Reusable Glassware |
Max. Pressure | 120 psi (inlet) |
Includes | Upper and lower standard racks |
Flow Rate | Hot water inlet 1.25 GPM (4.7 LPM), Cold water inlet of 3.5 GPM (13.2 LPM) |
Product Type | Laboratory Glassware Washer |
Wash Cycles | 9 programs with 1 to 9 total cycles |
Inlet Water Temperature (English) Min. | 120°F |
Certifications/Compliance | UL61010, CAN/CSA C22.2, CE |
Inlet Water Temperature (Metric) Min. | 49°C |
Display | Full-color Touch Screen |
Labconco™ LabSolutions™ Neutralizing Acid Rinse
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More


Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Mild acid corrects pH, reducing alkaline detergent residue

Labconco™ Protector™ XL™ Fume Hoods
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More


Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Protector™ XL™ Fume Hoods with By-Pass Block are low-velocity and high performance. Feature chemical-resistant fiberglass, composite panel liners, Eco-Foil™ air foil and aerodynamic Clean-Sweep™ airflow openings.

Receptacle Type | GFCI |
---|---|
Height (Metric) | 149.9 cm |
Depth (English) | 37.7 in. |
Color | Glacier White |
Material | Powder-coated Steel |
Product Type | Benchtop Fume Hood |
Depth (Metric) | 80.5 cm |
Voltage | 100/115 V |
Height (Metric) Sash Opening | 71.1 cm |
Amperage | 10 A |
Certifications/Compliance | SEFA 1; CFR 29, Part 1910; ASTM E84-09C; NFPA 45; ANSI Z9.5; ASHRAE 110; CAN/CSA C22.2 No. 61010.1; UL 61010-1; SEFA 8, Cabinet Surface Finish Tests; UL 1805 |
Lighting Type | LED |
Coating | Powder |
Liner Material | Chemical-resistant, Fiberglass-reinforced Composite |
Hertz | 50/60 Hz |
Labconco™ SpillStopper™ Work Surface for 6 Ft. Protector™Premier™and Protector™XL Hoods
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More


Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Labconco SpillStopper™ Work Surface is dished and contoured to conform to the interior liner to contain spills.

Product Type | Work Surface |
---|---|
For Use With (Equipment) | Protector XL Laboratory Hood |
Material | Epoxy Resin |
For Use With (Application) | Laboratory Fume Hood Work |
Labconco™ LabSolutions™ Powder Detergent
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More


Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Removes grease, blood, agar, protein digestates, and other contaminants

Form | Powder |
---|---|
Product Type | Detergent |
Color-coded | Yes |
pH | 12.5 |
Scent | Unscented |
For Use With (Application) | For use in Glassware washers, removes range of contaminants including Protein digestates, Agar, Blood and Grease |
Sterility | Non-sterile |
Labconco™ Filtered Dry Glove Box Humidity Removal Kit
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More

Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Provides a way to reduce moisture during weigh operations on glove boxes equipped with either HEPA or ULPA filters.
Labconco 5 ft. Nexus Horizontal Clean Bench
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More


Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Nexus Horizontal Clean Benches are designed to protect non-hazardous applications by providing an ISO Class 4 clean airflow environment. The large, 5 in. touchscreen interface features Nexus OS™ software that simplifies operation, maintains records and provides user customizaton of the system.
Height (Metric) | 127.5 cm |
---|---|
Plug Type | NEMA 5-20P |
Height (Metric) Interior | 76.7 cm |
IP Rating | None |
Product Type | Horizontal Clean Bench |
Color | Optic White |
Filter Type | HEPA |
Coating | Epoxy |
Height (English) Interior | 30.2 in. |
Height (English) | 50.1 in. |
Labconco™ Basic™ 70 Laboratory Hood
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More


Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Designed for laboratories, classrooms and light duty applications where safe ventilation is required. Constructed of powder-coated steel, Basic Hoods are economical and have a smaller overall height and depth than traditional hoods so they fit in areas with low ceilings or narrow aisles.
Flow Rate | 1120 cfm |
---|---|
Depth (English) | 25 in. |
Width (English) | 70 in. |
Product Type | Benchtop Fume Hood |
Depth (Metric) | 63.5 cm |
Color | Glacier White |
Model | Basic 70 |
Material | Epoxy-coated Steel |
Required Accessories | Remote blower (some models), ductwork, base cabinets, adjustable-height base stands, solid epoxy flat work surfaces. |
Certifications/Compliance | ANSI Z9.5, ASHRAE 110, ASTM E84, CAN/CSA C22.2, CE, NFPA 45, SEFA 1, UL |
Coating | Powder |
For Use With (Application) | Laboratories, classrooms and light duty applications where safe ventilation is required. |
Width (Metric) | 177.8 cm |
Labconco™ RapidVap™ Vertex Dry Evaporator Blocks
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More


Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Holds sample containers in place in RapidVap™ Vertex Dry Evaporators.
Labconco™ Replacement UV Lamp for WaterPro™PS Polishing Station
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More

Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
For use with WaterPro™ PS Polishing Systems.
Labconco™ Protector™ Demonstration Hood
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More

Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Low-profile, light-duty fume hoods provide close observation of procedures. Labconco™ Protector™ Demonstration Hood designed to provide 360° of close observation of procedures during educational demonstrations.
Includes | No service fixtures or duplex |
---|---|
Depth (English) | 29.1 in. |
Width (English) | 33.6 in. |
Product Type | Fume Hood |
Depth (Metric) | 73.9 cm |
Color | Glacier White, Gray |
Material | Glass |
Certifications/Compliance | ANSI Z9.5, Modified ASHRAE 110, SEFA 1 |
Coating | Powder |
Width (Metric) | 85.3 cm |